SecurityMan DVR-04 Guia de Instalação descarregar pdf (Página 26)

Chapter 3: First-Time NT500 Offline System Installation & Setup

3 – 8

Notes 4 Click OK.

The New Format window appears.

5 In the Name field, enter a name for the card format.

6 In the Description field, enter a description of the card

format.

A popular naming scheme is to use the name of your

company or department.

7 In the Type field, select the card type by using the drop-

down list.

8 Using the radio buttons, select the appropriate display

mode.

9 Check the LRC Checking box if readers should validate the

longitudinal redundancy check.

If the lock should not validate the LRC, make sure this

check box is not checked.

You can determine whether the locks using this configuration

validate the longitudinal redundancy check (LRC). However,

always validate the longitudinal redundancy check unless a

Stanley Security Solutions Representative informs you other-

wise. The LRC feature is included in most card formats and

helps verify that the locks read the card data or PIN correctly.

10 For a proximity or Wiegand card format, Click OK.

For magnetic stripe or custom Wiegand card format definition

continue with the following steps.

Figure 3.3 Adding a new card format

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 73 74

Sem comentários

SecurityMan DVR-04 Guia de Instalação Página 26