SecurityMan iCamDVR Manual do Utilizador descarregar pdf (Página 18)

in the Alarm Conguration panel to alert when there are

limited amount of space available. Once the present stor-

age space is less than the congured minimum storage

and the recycle record mode is disabled; the recording will

automatically stop.

17 | SecurityMan

To setup Motion Detection Record Mode follows three

easy steps as follow:

Select “Motion Detection”to enable motion detection per

camera under the”Basic Conguration”. Each channel

operates independent from one another.

Congure the “Schedule conguration” by setup the

days of the week, the time in a day, and the camera chan-

nel for motion to be active.

Finally, congure the motion detection areas and sensi-

tivity level for each camera(s) in the “Motion_Detection

conguration”

Recycling Record

If Recycling Record function is enabled and all the optional

selected hard disk drives or partitions are full, the oldest

recorded data will be overwritten by the latest/current

recording data.

Storage Disk may vary depending on how many hard

drives or partitions are available in the system. The record-

ing storage disk will automatically advance to the next

partition when full. If all the selected drives/partitions are

full and recycle record mode are enabled, the new record-

ing data will overwrite the former recorded data automati-

cally. HDD minimum storage alarm can also be congured

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 82 83

Sem comentários

SecurityMan iCamDVR Manual do Utilizador Página 18