SecurityMan iCamDVR Manual do Utilizador descarregar pdf (Página 36)

Relative explanations:

Port – COM or communication port. Please match 5.

this COM port to the serial COM port setup under

Figure 51- P.T.Z Serial Port Setting

35 | SecurityMan

PTZ camera to communicate with the serial port.

To congure Serial Port Setting start by matching the

Port setting with the Serial Port under the Protocol Con-

guration, for example if Serial Port uses COM5, match

the Port by selecting COM5. Set the Baud Rate, Data

bits, Parity, and Stop bits by referencing the PTZ camera

user’s guide. Older PTZ cameras may use 9600 baud rate

or lower, 8 for data bits, none for parity and stop bits may

varies depending on makers and models.

the protocol conguration.

Baud Rate - P.T.Z device Baud Rate ranges from 6.

1200, 2400, 4800, 9600 (default), 19200, 38400,

57600, and 115200. Please reference PTZ user’s

guide to specify correct baud rate for your camera.

Data bits – ranges from 4, 5, 6, 7, & 8 (default). 7.

Please reference PTZ user’s guide to specify cor-

rect data bits for your camera.

Parity – can be of None (default), Odd, Even, Mark 8.

& Space parity bit. Please reference PTZ user’s

guide to specify correct parity setting for your

camera.

Stop Bits – ranges from 1 (default), 1.5, & 2. Please 9.

reference PTZ user’s guide to specify correct stop

bits for your camera.

NOTICE

Please refer to the P.T.Z protocol camera manual/guide for

serial port setting such as Baud Rate, Protocol, Data Bits, Parity,

Stop Bits, and Address prior to PTZ Conguration.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 82 83

Sem comentários

SecurityMan iCamDVR Manual do Utilizador Página 36